Camper II

The traditional double-roof dome tent for short stays. The inner tent alone offers perfect protection against insects and mosquitoes.

Features/technical data

Outer tent: 190T polyester, PU-coated, hydrostatic head approx. 1000mm, PE 14/14 mud flaps coated on both sides. Door in the front wall with additional poles for sun protection available.

Inner tent: 190 T polycotton, breathable; PE10/10 floor coated on both sides, waterproof. With utensil pockets, door with mosquito gauze and fabric door insert.

Frames: fibre glass. 7.9mm for size 2, 8.5mm for sizes 3 and 4.

Packing dimensions:
Size 2: approx. 60 x 15cm (W x D)
Size 3: approx. 60 x 20cm (W x D)
Size 4: approx. 65 x 20cm (W x D)

Size table

Size	width × depth × height in cm	Weight in kg (ca.)

2	160x210x120	4
3	200x210x130	7
4	240x210x130	9

Supplied package:

Awning membrane
Awning frame
Tensioning material
Bag

Series equipment Camper II

Sealed seams:
all seams are sealed with a special band. This prevents moisture entering through the seam holes.

Covered zips:
zips in the outer awning on doors and windows are covered so that rainwater cannot enter the awning.

Safety tensioning:
in additional the normal ground guys, that always have to be carefully pegged and checked, a variety of additional supports can be used on the outer awning.

Ventilation in the outer awning:
the awnings are equipped with at least 2 ventilations that offer good exchange of air. These ventilations are covered and protected against rainwater.

Square inner tent:
inner tents are always developed in square shapes in order to achieve optimal use of space. This is important when air beds or beds are used to sleep on. Sloping inner tents do not offer the same comfort!

Double entrance door:
each inner tent can be closed with a door made of opaque fabric and/or an insect gauze. This option offers good circulation of air in warm weather without doing without protection against mosquitoes.

Ventilation in the inner tent:
the inner tent fabric is breathable and also has a ventilation flap for the optimum exchange of air.

Inner tent suspension:
the inner tent is attached using wide strips with loops and toggles. The downwards pulling force is therefore not just exerted upon a few seams but is distributed over a wide area. This means that the seam holes are not expanded and rainwater cannot enter the awning.

Erection instructions:
detailed and illustrated erection instructions are available and are provided for download on the information page.

Special features Camper II

"Fyn II" Wind Protection:
Added comfort whenever the wind is blowing.

Fyn II Window:
Added comfort whenever the wind is blowing: practical windbreak with window.

Accessory bag:
For curtains, tensioning accessories, wheel/wind cover – or as a travelling bag! 2 carrying handles and shoulder strap; 2 external and 1 internal pouch with zip fasteners.

Sprachen: